MODEL INOX WALL-FACING DOOR SYSTEMS

The door detail is a single-face system, where the door and panels are on the same straight line. The door operates between the overlapping profiles and closes over them.

Standart kapılarda; kapı geçiş boşluğu 64 cm, kapı panelinin genişliği 66 cm, yüksekliği ise 181 cm dir. Kapı sağdaki ve soldaki bini profillerinin üzerine kapanmaktadır. Kapı panelinden kaynaklanan fazlalık metraj çıkmaz. Kapıların; panel yüksekliği 183 cm + ayak + başlık olup bitmiş kapı yüksekliği 194 cm - 199 cm arasında değişir. Ara duvarların yüksekliği maksimum 190 cm, yan duvarların yüksekliği ise minimum 205 cm olması gerekir. Yan duvarlar, ara duvarlardan 5 cm önde olmalıdır.

Doors with a gap between two walls of 92 cm - 94 cm do not require feet. For gaps greater than 94 cm, a total of two feet are used, one on each of the right and left wall panels. These feet are mounted to the panels on the right and left of the door.

Large kabinlerde; Standart kapı geçiş boşluğu 64 cm, kapı panelinin genişliği 66 cm, yüksekliği ise 208 cm dir. Kapı sağdaki ve soldaki bini profillerinin üzerine kapanır. Kapı panelinden kaynaklanan fazlalık metraj çıkmaz. Kapıların; panel yüksekliği 210 cm + ayak + başlık olup bitmiş kapı yüksekliği 221 cm - 226 cm arasında değişir. Ara duvarların yüksekliği maksimum 217 cm, yan duvarların yüksekliği ise minimum 222 cm olması gerekir.

Regardless of the door width, care is taken to use a total of 2 feet, one on the middle panel and one on the wall panel. These feet are mounted to the panels on the right and left of the door. This model is more suitable for factories and public areas with heavy use. It stands out with its durability and aesthetics. The panels are in the CGS - CGF EN 438 - 4 group.

The panels are 12 mm compact laminate. Both surfaces are decorated and offer 100% resistance to water and moisture. They are extremely resistant to scratches and breakage. They have fire-retardant properties. They have hygienic surfaces and do not harbor bacteria. If the panels are also used as 12 mm CDF (Compact Density Fibreboard), they will still have double-sided decoration. However, they may not offer sufficient resistance to water and moisture and may swell over time due to exposure to water and moisture. They are not recommended for areas with water and high humidity. They are scratch-resistant and break-resistant. They have hygienic surfaces, do not harbor bacteria, and have fire-retardant properties.

TECHNICAL DETAILS

You can download product details and technical drawings.

AutoCAD Project

Specification

PDF Catalog

Shop Drawing

ACCESSORIES

LOCK
Made of stainless steel. It has a bright, rust-resistant finish. The lock is panel-mounted and has no strike plate. Designed for use in toilet stalls with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. It is antibacterial. It features a colored mechanism on the latch lock that indicates whether the stall is occupied or empty. It allows for external access in emergency situations. All mounting screws are stainless steel.

LOCK

Made of stainless steel. It has a bright, rust-resistant finish. The lock is panel-mounted and has no strike plate. Designed for use in toilet stalls with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. It is antibacterial. It features a colored mechanism on the latch lock that indicates whether the stall is occupied or empty. It allows for external access in emergency situations. All mounting screws are stainless steel.

HINGE
Made of stainless steel. It has a bright stainless steel finish. It is mounted on doors, walls, and central panels. Also called a single-sided system hinge. It is designed to close over the profiles on the right and left sides of the door. It is designed for use in toilet stalls with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Thanks to the plastic in the shaft inside the body, the door has a self-closing feature, and if desired, the door can be left open. All mounting screws are stainless steel.

HINGE

Made of stainless steel. It has a bright stainless steel finish. It is mounted on doors, walls, and central panels. Also called a single-sided system hinge. It is designed to close over the profiles on the right and left sides of the door. It is designed for use in toilet stalls with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Thanks to the plastic in the shaft inside the body, the door has a self-closing feature, and if desired, the door can be left open. All mounting screws are stainless steel.

15 cm LEG
Made of stainless steel. It has a bright stainless steel finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Allows cubicles to be mounted 15 cm above the floor. The feet are adjustable to adapt to the slope of the floor. It is antibacterial. It is attached to the floor at least at two points with stainless steel screws. All connecting screws are stainless steel.

15 cm LEG

Made of stainless steel. It has a bright stainless steel finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Allows cubicles to be mounted 15 cm above the floor. The feet are adjustable to adapt to the slope of the floor. It is antibacterial. It is attached to the floor at least at two points with stainless steel screws. All connecting screws are stainless steel.

10 cm LEG
Made of stainless steel. It has a bright stainless steel finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Allows cubicles to be mounted 10 cm above the floor. The feet are adjustable to adapt to the slope of the floor. It is antibacterial. It is attached to the floor at least at two points with stainless steel screws. All connecting screws are stainless steel.

10 cm LEG

Made of stainless steel. It has a bright stainless steel finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Allows cubicles to be mounted 10 cm above the floor. The feet are adjustable to adapt to the slope of the floor. It is antibacterial. It is attached to the floor at least at two points with stainless steel screws. All connecting screws are stainless steel.

HANGER-STOP
Made of stainless steel, it is extremely resistant to bending. The bottom hook acts as a hanger, while the top hook serves as both a hanger and a stopper. The plastic material at the end of the hook helps to soften and reduce the impact of the door slamming shut. All mounting screws are stainless steel.

HANDLE
It is made of stainless steel. It has a bright stainless steel finish. It can be mounted on both the inside and outside of the door, or just on the outside of the door.

HEADER PROFILE
It is manufactured from aluminum material. It has a bright anodized finish. It is mounted from the top of cabinets and on the sides of cabinets without walls. Header mounting on partition panels is not suitable. The profile has a thickness of 1 mm – 1.2 mm.

U PROFILE
It is manufactured from aluminum material. It has a bright anodized color. It is used in cabinets between the partition panel and the wall, and between the partition panel and the middle panel. The profile thickness is 1 mm – 1.2 mm.

DOOR BUILDING PROFILE
It is made of aluminum material. It has a bright anodized color. It is mounted on the panels located on both sides of the door. The door presses down on the profiles each time it is closed. The profile has a thickness of 1 mm – 1.2 mm.

L CORNER
It is made of stainless steel. It has a bright anodized finish. It is used to connect compact laminate panels to the corner wall in cabinets. The profile thickness is 1.5 mm – 2 mm.