The door detail is a single-face system, with the door and panels on the same straight line. A tongue-and-groove detail is opened in the door, and the tongue-and-groove detail on both sides runs between the panels and closes over them. The top of the door closure is also on the same plane as the panels.

In standard cabins, the door opening is 64 cm, the door panel width is 66 cm, and the height is 183 cm. The door closes over the panels with the tongue and groove detail on the right and left. There is no excess length resulting from the door panel. The cabins have a panel height of 260 cm + feet + headboard, and the finished cabin height varies between 270 cm and 275 cm depending on the ceiling height.

Regardless of the cabin width, care is taken to use a total of 2 feet: one on the middle panel and one on the wall panel. These feet are mounted to the panels on the right and left of the door.

This model is more suitable for company headquarters, shopping malls, and public areas with heavy use. It stands out with its durability and aesthetics. The panels are in the CGS - CGF EN 438 - 4 group.

The panels are 12 mm compact laminate. Both surfaces are decorated and offer 100% resistance to water and moisture. They are extremely resistant to scratches and breakage. They have fire-retardant properties. They have hygienic surfaces and do not harbor bacteria. If the panels are also used as 12 mm CDF (Compact Density Fibreboard), they will still have double-sided decoration. However, they may not offer sufficient resistance to water and moisture and may swell over time due to exposure to water and moisture. They are not recommended for areas with water and high humidity. They are scratch-resistant and break-resistant. They have hygienic surfaces, do not harbor bacteria, and have fire-retardant properties.

ACCESSORIES