MODEL CLASSIC DOOR SYSTEMS

The door has a hinged system, meaning the door and panels are not on the same straight line. The door operates from the rear, closing over the panels on the right and left.

For standard doors: the door opening is 64 cm, the door panel width is 70 cm, and the height is 181 cm. The door closes 3 cm above the right and left panels. This excess due to the door panel causes the total length to be approximately 6% higher. For doors with a panel height of 183 cm + base + header, the finished door height varies between 194 cm and 199 cm. The minimum wall height must be 205 cm. For doors with a gap between two walls of 92 cm and 94 cm, no base is used. For gaps greater than 94 cm, a total of two bases are used, one on each wall panel. These bases are mounted to the right and left panels of the door. For large doors: the standard door opening is 64 cm, the door panel width is 70 cm, and the height is 208 cm. The door closes 3 cm above the right and left panels. This excess material resulting from the door panel causes the total measurement to be approximately 6% higher. Doors with a panel height of 210 cm + base + header have a finished door height ranging from 221 cm to 226 cm. The minimum wall height must be 230 cm. Regardless of the door width, care is taken to use a total of 2 bases, one on each side of the wall panel. These bases are mounted to the panels on the right and left of the door.

This model is more suitable for factories and public areas with heavy use. It stands out with its durability and aesthetics. The panels are in the CGS - CGF EN 438 - 4 group. The panels are 12 mm compact laminate. Both surfaces are decorated and 100% resistant to water and moisture. They are extremely resistant to scratches and breakage. They have fire-retardant properties. They have hygienic surfaces and do not harbor bacteria. If the panels are also used as 12 mm CDF (Compact Density Fibreboard), they will still have double-sided decoration. They do not offer sufficient resistance to water and moisture and may swell over time due to water and moisture exposure. It is not recommended for areas with water and high humidity. It is resistant to scratches and breakage. It has hygienic surfaces, does not harbor bacteria, and has fire-retardant properties.

TECHNICAL DETAILS

You can download product details and technical drawings.

AutoCAD Project

Specification

PDF Catalog

Shop Drawing

ACCESSORIES

LOCK
Made from aluminum. It has a matte anodized finish. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. It is antibacterial. It has an indicator showing whether the cabinet is occupied or empty via a colored mechanism on the bolt lock. It can be accessed from the outside in case of emergencies. All connecting screws are stainless steel.

HINGE
Made of aluminum, it has a matte anodized finish. Also known as a panel-mounted hinge system, it is designed to overlap the right and left panels by 3 cm and operate behind them. It is designed for use in WC cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Thanks to the plastic inside the shaft, the door has a self-closing feature, and can be left open if desired. All mounting screws are stainless steel.

HINGE

Made of aluminum, it has a matte anodized finish. Also known as a panel-mounted hinge system, it is designed to overlap the right and left panels by 3 cm and operate behind them. It is designed for use in WC cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. Thanks to the plastic inside the shaft, the door has a self-closing feature, and can be left open if desired. All mounting screws are stainless steel.

15 cm LEG
Made of aluminum, it has a matte anodized finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. It allows cubicles to be mounted 15 cm above the ground. The feet are adjustable to adapt to the slope of the floor. It is antibacterial.

10 cm LEG
Made of aluminum, it has a matte anodized finish. It is mounted to the partition panel, or to one of the wall or middle panels. Designed for use in toilet cubicles with 12 mm compact laminate, 12 mm CDF panels, and other 18 mm panels. It allows cubicles to be mounted 10 cm above the ground. The feet are adjustable to adapt to the slope of the floor. It is antibacterial.

HANGER-STOP
Made of aluminum, it is resistant to bending. The bottom hook acts as a hanger, while the top hook serves as both a hanger and a stopper. The plastic material at the end of the hook helps to soften and reduce the impact of the door slamming shut. All mounting screws are stainless steel.

HANDLE
It is made of aluminum material. It can be mounted on both the inside and outside of the door, or just on the outside of the door. This model is only suitable for outward-opening doors and can be mounted on the door itself.

HEADER PROFILE
Made of aluminum. It has a matte anodized finish. It is mounted from the top of cabinets and on the sides of cabinets without walls. It is not suitable for mounting on partition panels. The profile has a thickness of 1 mm – 1.2 mm.

U PROFILE
It is made of aluminum material. It has a matte anodized color. It is used in cabinets between the partition panel and the wall, and between the partition panel and the middle panel. The profile has a thickness of 1 mm – 1.2 mm.

CORNER PROFILE
Made of aluminum. It has a matte anodized finish. Used to join two compact laminate panels at corners in cabinets. The profile has a thickness of 1 mm – 1.2 mm.